Mechanical characteristics of alkyd binder reinforced by surface modified colloidal nano silica

Miroslav Nikolic; Søren Talbro Barsberg; Flemming Hofmann Larsen; David Löf; Kell Mortensen; Anand Ramesh Sanadi

doi:10.1016/j.porgcoat.2015.10.013

Mechanical characteristics of alkyd binder reinforced by surface modified colloidal nano silica

Miroslav Nikolic, Søren Talbro Barsberg, Flemming Hofmann Larsen, David Löf, Kell Mortensen, Anand Ramesh Sanadi

3 Citations (Scopus)

Abstract

Performance and longevity of wood as a building material is dependent on the appropriate protection for the desired application. Alkyd based coatings have been in use for decades in order to protect wood. This study reports the influence of two differently modified colloidal nano silica on static and dynamic mechanical properties on a water-borne alkyd binder. An important aspect was to utilize Raman spectroscopy to ensure that all the composites are tested at the same state of cure. Increases of storage modulus and glass transmission temperature are reported together with changes in tensile properties. The tensile specimens were observed using SEM to obtain information on failure modes for the pure polymer and nano composites and difference in roughness of fracture surfaces is discussed. A beta relaxation of the alkyd binder was also found and was not hindered by the presence of nanoparticles.

Original language	English
Journal	Progress in Organic Coatings
Volume	90
Pages (from-to)	147-153
ISSN	0300-9440
DOIs	https://doi.org/10.1016/j.porgcoat.2015.10.013
Publication status	Published - 1 Jan 2016

Access to Document

10.1016/j.porgcoat.2015.10.013

1-s2.0-S0300944015301995-mainFinal published version, 1.06 MB

Cite this

@article{4a8caaec646d4a8c8ae883fff9f4ff85,

title = "Mechanical characteristics of alkyd binder reinforced by surface modified colloidal nano silica",

abstract = "Performance and longevity of wood as a building material is dependent on the appropriate protection for the desired application. Alkyd based coatings have been in use for decades in order to protect wood. This study reports the influence of two differently modified colloidal nano silica on static and dynamic mechanical properties on a water-borne alkyd binder. An important aspect was to utilize Raman spectroscopy to ensure that all the composites are tested at the same state of cure. Increases of storage modulus and glass transmission temperature are reported together with changes in tensile properties. The tensile specimens were observed using SEM to obtain information on failure modes for the pure polymer and nano composites and difference in roughness of fracture surfaces is discussed. A beta relaxation of the alkyd binder was also found and was not hindered by the presence of nanoparticles.",

author = "Miroslav Nikolic and Barsberg, {S{\o}ren Talbro} and Larsen, {Flemming Hofmann} and David L{\"o}f and Kell Mortensen and Sanadi, {Anand Ramesh}",

year = "2016",

month = jan,

day = "1",

doi = "10.1016/j.porgcoat.2015.10.013",

language = "English",

volume = "90",

pages = "147--153",

journal = "Progress in Organic Coatings",

issn = "0033-0655",

publisher = "Elsevier",

}

TY - JOUR

T1 - Mechanical characteristics of alkyd binder reinforced by surface modified colloidal nano silica

AU - Nikolic, Miroslav

AU - Barsberg, Søren Talbro

AU - Larsen, Flemming Hofmann

AU - Löf, David

AU - Mortensen, Kell

AU - Sanadi, Anand Ramesh

PY - 2016/1/1

Y1 - 2016/1/1

N2 - Performance and longevity of wood as a building material is dependent on the appropriate protection for the desired application. Alkyd based coatings have been in use for decades in order to protect wood. This study reports the influence of two differently modified colloidal nano silica on static and dynamic mechanical properties on a water-borne alkyd binder. An important aspect was to utilize Raman spectroscopy to ensure that all the composites are tested at the same state of cure. Increases of storage modulus and glass transmission temperature are reported together with changes in tensile properties. The tensile specimens were observed using SEM to obtain information on failure modes for the pure polymer and nano composites and difference in roughness of fracture surfaces is discussed. A beta relaxation of the alkyd binder was also found and was not hindered by the presence of nanoparticles.

AB - Performance and longevity of wood as a building material is dependent on the appropriate protection for the desired application. Alkyd based coatings have been in use for decades in order to protect wood. This study reports the influence of two differently modified colloidal nano silica on static and dynamic mechanical properties on a water-borne alkyd binder. An important aspect was to utilize Raman spectroscopy to ensure that all the composites are tested at the same state of cure. Increases of storage modulus and glass transmission temperature are reported together with changes in tensile properties. The tensile specimens were observed using SEM to obtain information on failure modes for the pure polymer and nano composites and difference in roughness of fracture surfaces is discussed. A beta relaxation of the alkyd binder was also found and was not hindered by the presence of nanoparticles.

U2 - 10.1016/j.porgcoat.2015.10.013

DO - 10.1016/j.porgcoat.2015.10.013

M3 - Journal article

SN - 0033-0655

VL - 90

SP - 147

EP - 153

JO - Progress in Organic Coatings

JF - Progress in Organic Coatings

ER -

Mechanical characteristics of alkyd binder reinforced by surface modified colloidal nano silica

Abstract

Access to Document

Fingerprint

Cite this