TY - JOUR
T1 - Investigation of response surface methodology for modelling ventilation rate of a naturally ventilated building
AU - Xiong, Shen
AU - Zhang, Guoqiang
AU - Bjerg, Bjarne Schmidt
PY - 2012/8
Y1 - 2012/8
N2 - The response surface methodology (RSM) based on different types of experimental design methods is investigated for modelling ventilation rate of a naturally ventilated building (NVB) as a function of wind speed and direction. As a mathematical modelling method, the RMS is essentially associated with a design of experiment (DOE). In literature few studies have been focused on the verification and validation of different DOE methods and the existing knowledge is insufficient to determine a suitable one for our study. Therefore in this research the traditional DOE methods, including the central composite rotatable design, the factorial design and the modern design method such as the uniform design and the optimal design method, were studied and compared in an application for modelling ventilation rate of an NVB. The response value of each experimental setup, defined as design point, is calculated by Computational Fluid Dynamics (CFD) simulation. The model based on the each DOE method is then built up for comparison. Among those DOE methods, the central composite design performs best in the quadratic models and the optimal design performs best in the cubic models. The RSM models improve very slightly when adding more design points and increasing the order of Taylor polynomial of the RSM models from cubic to higher. The models presented in this paper can be used to predict the ventilation rate of the naturally ventilated livestock building and similarly, the methods can be applied to the development of the approximated mathematical model to a system with more variables.
AB - The response surface methodology (RSM) based on different types of experimental design methods is investigated for modelling ventilation rate of a naturally ventilated building (NVB) as a function of wind speed and direction. As a mathematical modelling method, the RMS is essentially associated with a design of experiment (DOE). In literature few studies have been focused on the verification and validation of different DOE methods and the existing knowledge is insufficient to determine a suitable one for our study. Therefore in this research the traditional DOE methods, including the central composite rotatable design, the factorial design and the modern design method such as the uniform design and the optimal design method, were studied and compared in an application for modelling ventilation rate of an NVB. The response value of each experimental setup, defined as design point, is calculated by Computational Fluid Dynamics (CFD) simulation. The model based on the each DOE method is then built up for comparison. Among those DOE methods, the central composite design performs best in the quadratic models and the optimal design performs best in the cubic models. The RSM models improve very slightly when adding more design points and increasing the order of Taylor polynomial of the RSM models from cubic to higher. The models presented in this paper can be used to predict the ventilation rate of the naturally ventilated livestock building and similarly, the methods can be applied to the development of the approximated mathematical model to a system with more variables.
U2 - 10.1016/j.buildenv.2012.02.009
DO - 10.1016/j.buildenv.2012.02.009
M3 - Journal article
SN - 0360-1323
VL - 54
SP - 174
EP - 185
JO - Building and Environment
JF - Building and Environment
ER -