Investigation of nanocarriers and excipients for preparation of nanoembedded microparticles

Yingya Wang; Moritz Beck-broichsitter; Mingshi Yang; Jukka Rantanen; Adam Bohr

doi:10.1016/j.ijpharm.2017.05.008

Investigation of nanocarriers and excipients for preparation of nanoembedded microparticles

Yingya Wang, Moritz Beck-broichsitter, Mingshi Yang, Jukka Rantanen, Adam Bohr

8 Citations (Scopus)

Abstract

Colloidal drug delivery systems often face physical and chemical instability as well as challenges with directed delivery. In order to overcome these challenges the colloidal formulations can be processed into microparticulate form (nanoembedded microparticles (NEMs)). In this study, different polymer nanocarriers (poly(lactide-co-glycolide), poly(styrene), chitosan and dendrimers) were used for preparing NEMs by spray-drying. Further, distinct matrix excipients were investigated including sugars (i.e., trehalose, sucrose, mannitol) and polymers (poly(vinyl pyrrolidone) and poly(ethylene glycol)), and the characteristics and performance of NEMs were studied in detail. It was found that with increasing hydrophilicity of the polymer nanocarriers, an increasing amount of excipient was necessary to stabilize the nanoparticles. NEMs containing polyplexes and nanogels required a matrix-to-nanoparticle (M:N) ratio of 50:1 and 10:1, respectively, whereas NEMs with poly(styrene) and poly(lactide-co-glycolide) only required an M:N ratio of 1:1 and 1:4, respectively. Investigation of different excipients demonstrated that water soluble sugars and polymers can be used to prepare NEMs and that spray-dried amorphous excipients (trehalose, sucrose, poly(vinyl pyrrolidone)) are superior to spray-dried crystalline excipients (mannitol, poly(ethylene glycol)) for stabilizing NEMs. It is therefore important to select an appropriate excipient for stabilization of a given nanoparticle system and identify a suitable level of this excipient to keep the nanoparticles viable.

Original language	English
Journal	International Journal of Pharmaceutics
Volume	526
Issue number	1-2
Pages (from-to)	300-308
ISSN	0378-5173
DOIs	https://doi.org/10.1016/j.ijpharm.2017.05.008
Publication status	Published - 30 Jun 2017

Access to Document

10.1016/j.ijpharm.2017.05.008

Cite this

@article{8f3dbe61df6046c79364c52ab8da9592,

title = "Investigation of nanocarriers and excipients for preparation of nanoembedded microparticles",

abstract = "Colloidal drug delivery systems often face physical and chemical instability as well as challenges with directed delivery. In order to overcome these challenges the colloidal formulations can be processed into microparticulate form (nanoembedded microparticles (NEMs)). In this study, different polymer nanocarriers (poly(lactide-co-glycolide), poly(styrene), chitosan and dendrimers) were used for preparing NEMs by spray-drying. Further, distinct matrix excipients were investigated including sugars (i.e., trehalose, sucrose, mannitol) and polymers (poly(vinyl pyrrolidone) and poly(ethylene glycol)), and the characteristics and performance of NEMs were studied in detail. It was found that with increasing hydrophilicity of the polymer nanocarriers, an increasing amount of excipient was necessary to stabilize the nanoparticles. NEMs containing polyplexes and nanogels required a matrix-to-nanoparticle (M:N) ratio of 50:1 and 10:1, respectively, whereas NEMs with poly(styrene) and poly(lactide-co-glycolide) only required an M:N ratio of 1:1 and 1:4, respectively. Investigation of different excipients demonstrated that water soluble sugars and polymers can be used to prepare NEMs and that spray-dried amorphous excipients (trehalose, sucrose, poly(vinyl pyrrolidone)) are superior to spray-dried crystalline excipients (mannitol, poly(ethylene glycol)) for stabilizing NEMs. It is therefore important to select an appropriate excipient for stabilization of a given nanoparticle system and identify a suitable level of this excipient to keep the nanoparticles viable.",

author = "Yingya Wang and Moritz Beck-broichsitter and Mingshi Yang and Jukka Rantanen and Adam Bohr",

year = "2017",

month = jun,

day = "30",

doi = "10.1016/j.ijpharm.2017.05.008",

language = "English",

volume = "526",

pages = "300--308",

journal = "International Journal of Pharmaceutics",

issn = "0378-5173",

publisher = "Elsevier",

number = "1-2",

}

TY - JOUR

T1 - Investigation of nanocarriers and excipients for preparation of nanoembedded microparticles

AU - Wang, Yingya

AU - Beck-broichsitter, Moritz

AU - Yang, Mingshi

AU - Rantanen, Jukka

AU - Bohr, Adam

PY - 2017/6/30

Y1 - 2017/6/30

N2 - Colloidal drug delivery systems often face physical and chemical instability as well as challenges with directed delivery. In order to overcome these challenges the colloidal formulations can be processed into microparticulate form (nanoembedded microparticles (NEMs)). In this study, different polymer nanocarriers (poly(lactide-co-glycolide), poly(styrene), chitosan and dendrimers) were used for preparing NEMs by spray-drying. Further, distinct matrix excipients were investigated including sugars (i.e., trehalose, sucrose, mannitol) and polymers (poly(vinyl pyrrolidone) and poly(ethylene glycol)), and the characteristics and performance of NEMs were studied in detail. It was found that with increasing hydrophilicity of the polymer nanocarriers, an increasing amount of excipient was necessary to stabilize the nanoparticles. NEMs containing polyplexes and nanogels required a matrix-to-nanoparticle (M:N) ratio of 50:1 and 10:1, respectively, whereas NEMs with poly(styrene) and poly(lactide-co-glycolide) only required an M:N ratio of 1:1 and 1:4, respectively. Investigation of different excipients demonstrated that water soluble sugars and polymers can be used to prepare NEMs and that spray-dried amorphous excipients (trehalose, sucrose, poly(vinyl pyrrolidone)) are superior to spray-dried crystalline excipients (mannitol, poly(ethylene glycol)) for stabilizing NEMs. It is therefore important to select an appropriate excipient for stabilization of a given nanoparticle system and identify a suitable level of this excipient to keep the nanoparticles viable.

AB - Colloidal drug delivery systems often face physical and chemical instability as well as challenges with directed delivery. In order to overcome these challenges the colloidal formulations can be processed into microparticulate form (nanoembedded microparticles (NEMs)). In this study, different polymer nanocarriers (poly(lactide-co-glycolide), poly(styrene), chitosan and dendrimers) were used for preparing NEMs by spray-drying. Further, distinct matrix excipients were investigated including sugars (i.e., trehalose, sucrose, mannitol) and polymers (poly(vinyl pyrrolidone) and poly(ethylene glycol)), and the characteristics and performance of NEMs were studied in detail. It was found that with increasing hydrophilicity of the polymer nanocarriers, an increasing amount of excipient was necessary to stabilize the nanoparticles. NEMs containing polyplexes and nanogels required a matrix-to-nanoparticle (M:N) ratio of 50:1 and 10:1, respectively, whereas NEMs with poly(styrene) and poly(lactide-co-glycolide) only required an M:N ratio of 1:1 and 1:4, respectively. Investigation of different excipients demonstrated that water soluble sugars and polymers can be used to prepare NEMs and that spray-dried amorphous excipients (trehalose, sucrose, poly(vinyl pyrrolidone)) are superior to spray-dried crystalline excipients (mannitol, poly(ethylene glycol)) for stabilizing NEMs. It is therefore important to select an appropriate excipient for stabilization of a given nanoparticle system and identify a suitable level of this excipient to keep the nanoparticles viable.

U2 - 10.1016/j.ijpharm.2017.05.008

DO - 10.1016/j.ijpharm.2017.05.008

M3 - Journal article

C2 - 28479517

SN - 0378-5173

VL - 526

SP - 300

EP - 308

JO - International Journal of Pharmaceutics

JF - International Journal of Pharmaceutics

IS - 1-2

ER -