Modelling antibiotics transport in a waste stabilization pond system in Tanzania

Cathrine Christmas Moller; Johan J. Weisser; Sijaona Msigala; Robinson Mdegela; Sven Erik Jorgensen; Bjarne Styrishave

doi:10.1016/j.ecolmodel.2015.09.017

Modelling antibiotics transport in a waste stabilization pond system in Tanzania

Cathrine Christmas Moller, Johan J. Weisser, Sijaona Msigala, Robinson Mdegela, Sven Erik Jorgensen, Bjarne Styrishave

11 Citationer (Scopus)

Abstract

Antibiotics in wastewater have become a growing problem in urban and peri-urban areas in developing countries as a result of increased use and misuse of antibiotics. A simple dynamic model, that describes the most important removal processes of antibiotic from the wastewater stabilization pond system (WSP) “Mafisa” in Morogoro, Tanzania, was developed using STELLA® software package. The model was based on liquid chromatography tandem mass spectrometry (LCMS/MS) analysis of trimethoprim, in water collected in the WSP. Concentrations of trimethoprim measured in the dry season and the rainy season were used in development of the model. To determine the model's applicability to simulate the removal of trimethoprim, a calibration was performed using concentrations from the dry season and a validation was performed using concentrations from the rainy season. To test the model's capacity to simulate the removal of other antibiotics than trimethoprim, a second validation was performed for three other antibiotics; metronidazole, sulfamethoxazole and ciprofloxacin. A two-tailed t-test with a confidence interval of 95% showed no significant difference (P = 0.7819) between the values given by the model (CSIM) and the values measured by LCMS/MS (COBS) of the first validation, and the standard deviation (SD) between the differences was 1%. The second validation gave a mean SD = 18% (found by a two-tailed t-test with a confidence interval of 95%) of the differences between CSIM and COBS. The model was developed under the assumption that settling, biodegradation, hydrolysis and photolysis were the only removal processes other than outlet. The major removal processes for trimethoprim and sulfamethoxazole were through settling and the outlet. Ciprofloxacin was removed by settling in the first pond. Metronidazole was mainly removed through the outlet, but settling and hydrolysis/photolysis also played a role. A sensitivity analysis (±10%) showed that the soil adsorption coefficient, the amount of suspended matter and the ratio of flow rate and volume were the most sensitive parameters. To strengthen the model, the exact removal processes should be further analysed. To apply the model on other WSP, a calibration of the settling rate constant and the amount of suspended matter should be performed.

Originalsprog	Engelsk
Tidsskrift	Ecological Modelling
Vol/bind	319
Sider (fra-til)	137-146
Antal sider	10
ISSN	0304-3800
DOI	https://doi.org/10.1016/j.ecolmodel.2015.09.017
Status	Udgivet - 10 jan. 2016

Adgang til dokumentet

10.1016/j.ecolmodel.2015.09.017

Citationsformater

@article{9901f742814e40278a2c42fb24ee144c,

title = "Modelling antibiotics transport in a waste stabilization pond system in Tanzania",

abstract = "Antibiotics in wastewater have become a growing problem in urban and peri-urban areas in developing countries as a result of increased use and misuse of antibiotics. A simple dynamic model, that describes the most important removal processes of antibiotic from the wastewater stabilization pond system (WSP) “Mafisa” in Morogoro, Tanzania, was developed using STELLA{\textregistered} software package. The model was based on liquid chromatography tandem mass spectrometry (LCMS/MS) analysis of trimethoprim, in water collected in the WSP. Concentrations of trimethoprim measured in the dry season and the rainy season were used in development of the model. To determine the model's applicability to simulate the removal of trimethoprim, a calibration was performed using concentrations from the dry season and a validation was performed using concentrations from the rainy season. To test the model's capacity to simulate the removal of other antibiotics than trimethoprim, a second validation was performed for three other antibiotics; metronidazole, sulfamethoxazole and ciprofloxacin. A two-tailed t-test with a confidence interval of 95% showed no significant difference (P = 0.7819) between the values given by the model (CSIM) and the values measured by LCMS/MS (COBS) of the first validation, and the standard deviation (SD) between the differences was 1%. The second validation gave a mean SD = 18% (found by a two-tailed t-test with a confidence interval of 95%) of the differences between CSIM and COBS. The model was developed under the assumption that settling, biodegradation, hydrolysis and photolysis were the only removal processes other than outlet. The major removal processes for trimethoprim and sulfamethoxazole were through settling and the outlet. Ciprofloxacin was removed by settling in the first pond. Metronidazole was mainly removed through the outlet, but settling and hydrolysis/photolysis also played a role. A sensitivity analysis (±10%) showed that the soil adsorption coefficient, the amount of suspended matter and the ratio of flow rate and volume were the most sensitive parameters. To strengthen the model, the exact removal processes should be further analysed. To apply the model on other WSP, a calibration of the settling rate constant and the amount of suspended matter should be performed.",

keywords = "STELLA, Sulfamethoxazole, Ciprofloxacin, Metronidazole, Trimethoprim, Degradation, Photolysis, Hydrolysis",

author = "Moller, {Cathrine Christmas} and Weisser, {Johan J.} and Sijaona Msigala and Robinson Mdegela and Jorgensen, {Sven Erik} and Bjarne Styrishave",

year = "2016",

month = jan,

day = "10",

doi = "10.1016/j.ecolmodel.2015.09.017",

language = "English",

volume = "319",

pages = "137--146",

journal = "Ecological Modelling",

issn = "0304-3800",

publisher = "Elsevier",

}

TY - JOUR

T1 - Modelling antibiotics transport in a waste stabilization pond system in Tanzania

AU - Moller, Cathrine Christmas

AU - Weisser, Johan J.

AU - Msigala, Sijaona

AU - Mdegela, Robinson

AU - Jorgensen, Sven Erik

AU - Styrishave, Bjarne

PY - 2016/1/10

Y1 - 2016/1/10

N2 - Antibiotics in wastewater have become a growing problem in urban and peri-urban areas in developing countries as a result of increased use and misuse of antibiotics. A simple dynamic model, that describes the most important removal processes of antibiotic from the wastewater stabilization pond system (WSP) “Mafisa” in Morogoro, Tanzania, was developed using STELLA® software package. The model was based on liquid chromatography tandem mass spectrometry (LCMS/MS) analysis of trimethoprim, in water collected in the WSP. Concentrations of trimethoprim measured in the dry season and the rainy season were used in development of the model. To determine the model's applicability to simulate the removal of trimethoprim, a calibration was performed using concentrations from the dry season and a validation was performed using concentrations from the rainy season. To test the model's capacity to simulate the removal of other antibiotics than trimethoprim, a second validation was performed for three other antibiotics; metronidazole, sulfamethoxazole and ciprofloxacin. A two-tailed t-test with a confidence interval of 95% showed no significant difference (P = 0.7819) between the values given by the model (CSIM) and the values measured by LCMS/MS (COBS) of the first validation, and the standard deviation (SD) between the differences was 1%. The second validation gave a mean SD = 18% (found by a two-tailed t-test with a confidence interval of 95%) of the differences between CSIM and COBS. The model was developed under the assumption that settling, biodegradation, hydrolysis and photolysis were the only removal processes other than outlet. The major removal processes for trimethoprim and sulfamethoxazole were through settling and the outlet. Ciprofloxacin was removed by settling in the first pond. Metronidazole was mainly removed through the outlet, but settling and hydrolysis/photolysis also played a role. A sensitivity analysis (±10%) showed that the soil adsorption coefficient, the amount of suspended matter and the ratio of flow rate and volume were the most sensitive parameters. To strengthen the model, the exact removal processes should be further analysed. To apply the model on other WSP, a calibration of the settling rate constant and the amount of suspended matter should be performed.

AB - Antibiotics in wastewater have become a growing problem in urban and peri-urban areas in developing countries as a result of increased use and misuse of antibiotics. A simple dynamic model, that describes the most important removal processes of antibiotic from the wastewater stabilization pond system (WSP) “Mafisa” in Morogoro, Tanzania, was developed using STELLA® software package. The model was based on liquid chromatography tandem mass spectrometry (LCMS/MS) analysis of trimethoprim, in water collected in the WSP. Concentrations of trimethoprim measured in the dry season and the rainy season were used in development of the model. To determine the model's applicability to simulate the removal of trimethoprim, a calibration was performed using concentrations from the dry season and a validation was performed using concentrations from the rainy season. To test the model's capacity to simulate the removal of other antibiotics than trimethoprim, a second validation was performed for three other antibiotics; metronidazole, sulfamethoxazole and ciprofloxacin. A two-tailed t-test with a confidence interval of 95% showed no significant difference (P = 0.7819) between the values given by the model (CSIM) and the values measured by LCMS/MS (COBS) of the first validation, and the standard deviation (SD) between the differences was 1%. The second validation gave a mean SD = 18% (found by a two-tailed t-test with a confidence interval of 95%) of the differences between CSIM and COBS. The model was developed under the assumption that settling, biodegradation, hydrolysis and photolysis were the only removal processes other than outlet. The major removal processes for trimethoprim and sulfamethoxazole were through settling and the outlet. Ciprofloxacin was removed by settling in the first pond. Metronidazole was mainly removed through the outlet, but settling and hydrolysis/photolysis also played a role. A sensitivity analysis (±10%) showed that the soil adsorption coefficient, the amount of suspended matter and the ratio of flow rate and volume were the most sensitive parameters. To strengthen the model, the exact removal processes should be further analysed. To apply the model on other WSP, a calibration of the settling rate constant and the amount of suspended matter should be performed.

KW - STELLA

KW - Sulfamethoxazole

KW - Ciprofloxacin

KW - Metronidazole

KW - Trimethoprim

KW - Degradation

KW - Photolysis

KW - Hydrolysis

U2 - 10.1016/j.ecolmodel.2015.09.017

DO - 10.1016/j.ecolmodel.2015.09.017

M3 - Journal article

SN - 0304-3800

VL - 319

SP - 137

EP - 146

JO - Ecological Modelling

JF - Ecological Modelling

ER -