Evaluation of ring shear testing as a characterization method for powder flow in small-scale powder processing equipment

Søren Vinter Søgaard; Troels Pedersen; Morten Allesø; Joergen Garnaes; Jukka Rantanen

doi:10.1016/j.ijpharm.2014.08.060

Evaluation of ring shear testing as a characterization method for powder flow in small-scale powder processing equipment

Søren Vinter Søgaard, Troels Pedersen, Morten Allesø, Joergen Garnaes, Jukka Rantanen

35 Citationer (Scopus)

Abstract

Powder flow in small-scale equipment is challenging to predict. To meet this need, the impact of consolidation during powder flow characterization, the level of consolidation existing during discharge of powders from a tablet press hopper and the uncertainty of shear and wall friction measurements at small consolidation stresses were investigated. For this purpose, three grades of microcrystalline cellulose were used. Results showed that powder flow properties depend strongly on the consolidation during testing. The consolidation during discharge in terms of the major principal stress and wall normal stress were approximately 200Pa and 114Pa, respectively, in the critical transition from the converging to the lower vertical section of the hopper. The lower limit of consolidation for the shear and wall friction test was approximately 500Pa and 200Pa, respectively. At this consolidation level, the wall and shear stress resolution influences the precision of the measured powder flow properties. This study highlights the need for an improved experimental setup which would be capable of measuring the flow properties of powders under very small consolidation stresses with a high shear stress resolution. This will allow the accuracy, precision and applicability of the shear test to be improved for pharmaceutical applications.

Originalsprog	Engelsk
Tidsskrift	International Journal of Pharmaceutics
Vol/bind	475
Udgave nummer	1-2
Sider (fra-til)	315-323
Antal sider	9
ISSN	0378-5173
DOI	https://doi.org/10.1016/j.ijpharm.2014.08.060
Status	Udgivet - 20 nov. 2014

Adgang til dokumentet

10.1016/j.ijpharm.2014.08.060

Citationsformater

@article{fd5a2f7c9e3a47f185a2bdefb72ffff1,

title = "Evaluation of ring shear testing as a characterization method for powder flow in small-scale powder processing equipment",

abstract = "Powder flow in small-scale equipment is challenging to predict. To meet this need, the impact of consolidation during powder flow characterization, the level of consolidation existing during discharge of powders from a tablet press hopper and the uncertainty of shear and wall friction measurements at small consolidation stresses were investigated. For this purpose, three grades of microcrystalline cellulose were used. Results showed that powder flow properties depend strongly on the consolidation during testing. The consolidation during discharge in terms of the major principal stress and wall normal stress were approximately 200Pa and 114Pa, respectively, in the critical transition from the converging to the lower vertical section of the hopper. The lower limit of consolidation for the shear and wall friction test was approximately 500Pa and 200Pa, respectively. At this consolidation level, the wall and shear stress resolution influences the precision of the measured powder flow properties. This study highlights the need for an improved experimental setup which would be capable of measuring the flow properties of powders under very small consolidation stresses with a high shear stress resolution. This will allow the accuracy, precision and applicability of the shear test to be improved for pharmaceutical applications.",

author = "S{\o}gaard, {S{\o}ren Vinter} and Troels Pedersen and Morten Alles{\o} and Joergen Garnaes and Jukka Rantanen",

year = "2014",

month = nov,

day = "20",

doi = "10.1016/j.ijpharm.2014.08.060",

language = "English",

volume = "475",

pages = "315--323",

journal = "International Journal of Pharmaceutics",

issn = "0378-5173",

publisher = "Elsevier",

number = "1-2",

}

TY - JOUR

T1 - Evaluation of ring shear testing as a characterization method for powder flow in small-scale powder processing equipment

AU - Søgaard, Søren Vinter

AU - Pedersen, Troels

AU - Allesø, Morten

AU - Garnaes, Joergen

AU - Rantanen, Jukka

PY - 2014/11/20

Y1 - 2014/11/20

N2 - Powder flow in small-scale equipment is challenging to predict. To meet this need, the impact of consolidation during powder flow characterization, the level of consolidation existing during discharge of powders from a tablet press hopper and the uncertainty of shear and wall friction measurements at small consolidation stresses were investigated. For this purpose, three grades of microcrystalline cellulose were used. Results showed that powder flow properties depend strongly on the consolidation during testing. The consolidation during discharge in terms of the major principal stress and wall normal stress were approximately 200Pa and 114Pa, respectively, in the critical transition from the converging to the lower vertical section of the hopper. The lower limit of consolidation for the shear and wall friction test was approximately 500Pa and 200Pa, respectively. At this consolidation level, the wall and shear stress resolution influences the precision of the measured powder flow properties. This study highlights the need for an improved experimental setup which would be capable of measuring the flow properties of powders under very small consolidation stresses with a high shear stress resolution. This will allow the accuracy, precision and applicability of the shear test to be improved for pharmaceutical applications.

AB - Powder flow in small-scale equipment is challenging to predict. To meet this need, the impact of consolidation during powder flow characterization, the level of consolidation existing during discharge of powders from a tablet press hopper and the uncertainty of shear and wall friction measurements at small consolidation stresses were investigated. For this purpose, three grades of microcrystalline cellulose were used. Results showed that powder flow properties depend strongly on the consolidation during testing. The consolidation during discharge in terms of the major principal stress and wall normal stress were approximately 200Pa and 114Pa, respectively, in the critical transition from the converging to the lower vertical section of the hopper. The lower limit of consolidation for the shear and wall friction test was approximately 500Pa and 200Pa, respectively. At this consolidation level, the wall and shear stress resolution influences the precision of the measured powder flow properties. This study highlights the need for an improved experimental setup which would be capable of measuring the flow properties of powders under very small consolidation stresses with a high shear stress resolution. This will allow the accuracy, precision and applicability of the shear test to be improved for pharmaceutical applications.

U2 - 10.1016/j.ijpharm.2014.08.060

DO - 10.1016/j.ijpharm.2014.08.060

M3 - Journal article

C2 - 25178826

SN - 0378-5173

VL - 475

SP - 315

EP - 323

JO - International Journal of Pharmaceutics

JF - International Journal of Pharmaceutics

IS - 1-2

ER -

Evaluation of ring shear testing as a characterization method for powder flow in small-scale powder processing equipment

Abstract

Adgang til dokumentet

Fingeraftryk

Citationsformater