Effect of microwave power, air velocity and temperature on the final drying of osmotically dehydrated bananas

Nádia R. Pereira; Antonio Marsaioli; Lília M. Ahrné

doi:10.1016/j.jfoodeng.2006.09.025

Effect of microwave power, air velocity and temperature on the final drying of osmotically dehydrated bananas

Nádia R. Pereira, Antonio Marsaioli, Lília M. Ahrné^*

^*Corresponding author af dette arbejde

57 Citationer (Scopus)

Abstract

This paper reports on a study of the final stage of microwave-hot air drying of osmotically dehydrated bananas, focusing on the effects of microwave power, air temperature and air velocity on drying kinetics and product quality, evaluated in terms of colour, apparent volume and porosity. The drying process was divided into three periods: phase I (760 W; 2 kg_moisture/kg_{dry matter}); phase II (380 W; 0.67 kg_moisture/kg_{dry matter}); and phase III (0 W, 76 W, 150 W or 230 W up to the final sample moisture of 0.17 kg_water/kg_{d m}). Three conditions for the hot air were tested: 50 °C and 3.3 m/s; 70 °C and 3.3 m/s; 70 °C and 5.7 m/s. The results show that increasing the microwave power in phase III increased the drying rate, thus making the drying time shorter. However, higher microwave power also caused temperature runaway leading to charring on the dried product. Air flow cools the product surface and improves product quality by reducing charring.

Originalsprog	Engelsk
Tidsskrift	Journal of Food Engineering
Vol/bind	81
Udgave nummer	1
Sider (fra-til)	79-87
Antal sider	9
ISSN	0260-8774
DOI	https://doi.org/10.1016/j.jfoodeng.2006.09.025
Status	Udgivet - 2007
Udgivet eksternt	Ja

Adgang til dokumentet

10.1016/j.jfoodeng.2006.09.025

Citationsformater

@article{729133a745064dffa0466a55e10a4089,

title = "Effect of microwave power, air velocity and temperature on the final drying of osmotically dehydrated bananas",

abstract = "This paper reports on a study of the final stage of microwave-hot air drying of osmotically dehydrated bananas, focusing on the effects of microwave power, air temperature and air velocity on drying kinetics and product quality, evaluated in terms of colour, apparent volume and porosity. The drying process was divided into three periods: phase I (760 W; 2 kgmoisture/kgdry matter); phase II (380 W; 0.67 kgmoisture/kgdry matter); and phase III (0 W, 76 W, 150 W or 230 W up to the final sample moisture of 0.17 kgwater/kgd m). Three conditions for the hot air were tested: 50 °C and 3.3 m/s; 70 °C and 3.3 m/s; 70 °C and 5.7 m/s. The results show that increasing the microwave power in phase III increased the drying rate, thus making the drying time shorter. However, higher microwave power also caused temperature runaway leading to charring on the dried product. Air flow cools the product surface and improves product quality by reducing charring.",

keywords = "Fruits, Microwave final drying, Porosity, Product quality",

author = "Pereira, {N{\'a}dia R.} and Antonio Marsaioli and Ahrn{\'e}, {L{\'i}lia M.}",

year = "2007",

doi = "10.1016/j.jfoodeng.2006.09.025",

language = "English",

volume = "81",

pages = "79--87",

journal = "Journal of Food Engineering",

issn = "0260-8774",

publisher = "Elsevier",

number = "1",

}

TY - JOUR

T1 - Effect of microwave power, air velocity and temperature on the final drying of osmotically dehydrated bananas

AU - Pereira, Nádia R.

AU - Marsaioli, Antonio

AU - Ahrné, Lília M.

PY - 2007

Y1 - 2007

N2 - This paper reports on a study of the final stage of microwave-hot air drying of osmotically dehydrated bananas, focusing on the effects of microwave power, air temperature and air velocity on drying kinetics and product quality, evaluated in terms of colour, apparent volume and porosity. The drying process was divided into three periods: phase I (760 W; 2 kgmoisture/kgdry matter); phase II (380 W; 0.67 kgmoisture/kgdry matter); and phase III (0 W, 76 W, 150 W or 230 W up to the final sample moisture of 0.17 kgwater/kgd m). Three conditions for the hot air were tested: 50 °C and 3.3 m/s; 70 °C and 3.3 m/s; 70 °C and 5.7 m/s. The results show that increasing the microwave power in phase III increased the drying rate, thus making the drying time shorter. However, higher microwave power also caused temperature runaway leading to charring on the dried product. Air flow cools the product surface and improves product quality by reducing charring.

AB - This paper reports on a study of the final stage of microwave-hot air drying of osmotically dehydrated bananas, focusing on the effects of microwave power, air temperature and air velocity on drying kinetics and product quality, evaluated in terms of colour, apparent volume and porosity. The drying process was divided into three periods: phase I (760 W; 2 kgmoisture/kgdry matter); phase II (380 W; 0.67 kgmoisture/kgdry matter); and phase III (0 W, 76 W, 150 W or 230 W up to the final sample moisture of 0.17 kgwater/kgd m). Three conditions for the hot air were tested: 50 °C and 3.3 m/s; 70 °C and 3.3 m/s; 70 °C and 5.7 m/s. The results show that increasing the microwave power in phase III increased the drying rate, thus making the drying time shorter. However, higher microwave power also caused temperature runaway leading to charring on the dried product. Air flow cools the product surface and improves product quality by reducing charring.

KW - Fruits

KW - Microwave final drying

KW - Porosity

KW - Product quality

U2 - 10.1016/j.jfoodeng.2006.09.025

DO - 10.1016/j.jfoodeng.2006.09.025

M3 - Journal article

AN - SCOPUS:33846612021

SN - 0260-8774

VL - 81

SP - 79

EP - 87

JO - Journal of Food Engineering

JF - Journal of Food Engineering

IS - 1

ER -

Effect of microwave power, air velocity and temperature on the final drying of osmotically dehydrated bananas

Abstract

Adgang til dokumentet

Fingeraftryk

Citationsformater