A non-destructive method for quality control of the pellet distribution within a MUPS tablet by terahertz pulsed imaging

TY - JOUR

T1 - A non-destructive method for quality control of the pellet distribution within a MUPS tablet by terahertz pulsed imaging

AU - Novikova, Anna

AU - Markl, Daniel

AU - Axel Zeitler, J

AU - Rades, Thomas

AU - Leopold, Claudia S

N1 - Copyright © 2017. Published by Elsevier B.V.

PY - 2018/1/1

Y1 - 2018/1/1

N2 - Terahertz pulsed imaging (TPI) was applied to analyse the inner structure of multiple unit pellet system (MUPS) tablets. MUPS tablets containing different amounts of theophylline pellets coated with Eudragit® NE 30 D and with microcrystalline cellulose (MCC) as cushioning agent were analysed. The tablets were imaged by TPI and the results were compared to X-ray microtomography. The terahertz pulse beam propagates through the tablets and is back-reflected at the interface between the MCC matrix and the coated pellets within the tablet causing a peak in the terahertz waveform. Cross-section images of the tablets were extracted at different depths and parallel to the tablet faces from 3D terahertz data to visualise the surface-near structure of the MUPS tablets. The images of the surface-near structure of the MUPS tablets were compared to X-ray microtomography images at the same depths. The surface-near structure could be clearly resolved by TPI at depths between 24 and 152 μm below the tablet surface. An increasing amount of pellets within the MUPS tablets appears to slightly decrease the detectability of the pellets within the tablets by TPI. TPI was shown to be a non-destructive method for the detection of pellets within the tablets and could resolve structures thicker than 30 μm. In conclusion, a proof-of-concept was provided for TPI as a method of quality control for MUPS tablets.

AB - Terahertz pulsed imaging (TPI) was applied to analyse the inner structure of multiple unit pellet system (MUPS) tablets. MUPS tablets containing different amounts of theophylline pellets coated with Eudragit® NE 30 D and with microcrystalline cellulose (MCC) as cushioning agent were analysed. The tablets were imaged by TPI and the results were compared to X-ray microtomography. The terahertz pulse beam propagates through the tablets and is back-reflected at the interface between the MCC matrix and the coated pellets within the tablet causing a peak in the terahertz waveform. Cross-section images of the tablets were extracted at different depths and parallel to the tablet faces from 3D terahertz data to visualise the surface-near structure of the MUPS tablets. The images of the surface-near structure of the MUPS tablets were compared to X-ray microtomography images at the same depths. The surface-near structure could be clearly resolved by TPI at depths between 24 and 152 μm below the tablet surface. An increasing amount of pellets within the MUPS tablets appears to slightly decrease the detectability of the pellets within the tablets by TPI. TPI was shown to be a non-destructive method for the detection of pellets within the tablets and could resolve structures thicker than 30 μm. In conclusion, a proof-of-concept was provided for TPI as a method of quality control for MUPS tablets.

KW - Journal Article

U2 - 10.1016/j.ejps.2017.10.029

DO - 10.1016/j.ejps.2017.10.029

M3 - Journal article

C2 - 29056403

SN - 0928-0987

VL - 111

SP - 549

EP - 555

JO - European Journal of Pharmaceutical Sciences

JF - European Journal of Pharmaceutical Sciences

ER -